close source 91 mobile phone A rough schematic of the iPhone 16 Pro has been leaked, showing the usual design but with some minor changes. The report also includes precise dimensions, pointing to larger screens. But first things first. Here are the leaked images.
iPhone 16 Pro schematic
As you can see, the iPhone 16 Pro’s capture button is located just below the power button on the right side of the bezel. The button itself mimics the soft shutter button on your camera. A light press will cause the camera to focus, while a full press will take a photo. Sony phones had this feature not long ago.
iPhone 16 Pro schematic
Additionally, the leak reports new dimensions— 149.6 x 71.4 x 8.4mm, which means the 16 Pro will be slightly taller and wider. This confirms previous reports that the iPhone 16 Pro will feature a 6.3-inch screen, up from last year’s 6.1-inch panel. Additionally, the schematic shows some narrow bezels, so we may end up seeing a larger iPhone 16 Pro.
The decision to expand the smaller Pro this year likely stems from design constraints. There are rumors that the iPhone 16 Pro will use the quad-prism telephoto camera from last year’s iPhone 15 Pro Max, and this hardware may not fit in the existing iPhone 15 Pro.
Interestingly, this leak appears to directly contradict an image leaked in February that showed a vertical camera stack.
Regardless, we’re still far away from the actual launch of the iPhone 16 series in September, so we take every leak with a certain amount of skepticism.
source